Product Details:
Minimum Order Quantity | 1 Unit |
Air Flow Rate | 10 to 200cfm |
Maximum Pressure | 16 bar |
Maximum Air Inlet Temperature | 38 Degree Celcious |
Automatic Grade | Automatic |
Capacity | 10 to 200 cfm |
Control | Compact digital carbon monoxide CO monitor |
Working Pressure | 16 bar |
Electrical value | 85-265V / 1 Ph / 50/60 Hz |
Minimum working pressure | 4 bar g |
Maximum working pressure | 16 bar g |
Maximum inlet air temperature | 45 degree C |
TBAS Medical Dryers:The TBAS medical dryers operate with the principle of Pressure Swing Adsorption, hence removing more moisturethan refrigeration air dryers, and delivers moisture free dry air consistently irrespective of flow variation.
DESCRIPTION OF OPERATION :
Drying cycle:The compressed wet air flows through the pre filter. The Liquid water particles get filtered by the filter. The filteredair flows in to the adsorber tower filled with desiccant where it loses all the moisture to the desiccant. Purified (Moistureand oil free) air further passing through the series filter to achieve the desired quality level as per Breathing Standard.
Regeneration Cycle:In order to remove the moisture during regeneration cycle. Small portion of dry air from the drying tower is passesover the desiccant through the regeneration orifice. This results in complete regeneration of desiccant and ready forthe next cycle.
Standard Features:* Single Medical breathing Air unit with CO and Dew Point Monitor (Simplex)# Dual Medical breathing Air unit with CO and Dew Point Monitor (Duplex) One Stand by unit with manual redundancy.
Features:- Guaranteed dew point performance
- No refrigerants used
- Desiccant immobilized to eliminate dusting
- Design simplicity
- Purge saving control
- Air quality mandated by NFPA 99
- CO & Dewpoint monitor.
Additional Information:
- Item Code: TBAS-Series
- Production Capacity: 10-40 Units
- Delivery Time: 3-4 Weeks
- Packaging Details: Wooden Crates